How to select qualify wire side chair ?


After this COVID 19 pandemic, Maka furniture is going all out to speed up production and meet the needs of new customers. We have active, efficient and automatic production lines, and we are confident to create higher production capacity to meet customers’ new orders. Please be assured that production will speed up the automation process, rather than at the expense of quality.

We will carry out strict quality inspection and thorough control as always to ensure the good shape of the goods and pass the quality control inspection on the first attempt, so as to save your waiting time and delay the cost. At the same time, we will attach great importance to the safety of our employees, and finally provide customers with safe and high-quality products.

The iron wire chair has been in existence for at least half a century. It has a sense of industrial design, relieves people’s pressure, has an affinity for metal mesh, shows classic and generous air, and the balance of the metal wire chair Stability is very good, you can put the chair on any occasion, and curtains, carpets, hangers, lamps and lanterns match into a whole, in addition, with personalized small tea table, balcony flower rack, is to decorate the furniture become flexible and full of passion. And how to choose the qualify wire side chairs? What is the standard measurement and quality notice ? let us introduce for you.

Let’s explain the quality inspection of the iron wire chair. This part is also concerned by many customers:

Because every iron chair will go through 5 times of strict quality inspection,The first time: after the chair is welded and formed, it is mainly to check whether the welding spot is correct, and whether the welding joint is flat and smooth without bulge,

The second time: whether the chair can be polished and formed, whether the chair frame and chair surface can be assembled accurately and smoothly, whether the screw hole position is not correct and difficult to assemble, whether the cutting part of the chair is polished smoothly without burr, if any point is found, the whole chair will be disassembled and voided.

The third time: after spraying, check whether the spraying part is smooth without bulge, and return to the factory for re spraying in case of missing spraying

The fourth time: before the inner packaging, the workers check one by one again to see whether each chair is welded and whether all parts are painted completely. If there is no problem, the chair is sent to upload and send to the position of the final packaging master.

The fifth time: the packing master uses foam strips to wrap all the leaking parts of the chair, and at the same time, check whether there is any paint leakage.

Every chair is like a cruel test, which is repeatedly and carefully inspected. Our QC and workers will pick out any defective products, so that every product you receive is safe and beautiful. This is also the principle that we always adhere to.

Every part including welding spot, hole position, grinding, paint surface and installation will be carefully inspected. Even if some defects are not found in time, they will be picked out in the repeated inspection of three times, four times and five times, which is why we receive very few quality complaints.

We have strict quality requirements for the painting of chairs, all of which are green environmental protection paint of EU standard, which is smooth but not loose, with strong adhesion and keep luster. The paint and Pu cushion are lead-free, mercury-free, orthobenzene free, absolutely environmental protection, so that you can use them more safely without worries.

Our chairs have passed the European Union standard test report. The stability of the chair back, the edge of the chair and the legs of the chair have been tested. The load-bearing beam written on your report is 300kgs, so you can rest assured that the weight of the chair itself is 5.2kgs, which is stable and not easy to shake at home, and can bear such a heavy kilogram.

So how can iron products be used outdoors? Can’t it rust? Let’s explain, Outdoor iron wire chairs and chairs will be polished and polished after welding and forming, and then they will be plated with one layer of electrophoresis. This technology is like the antirust treatment of the smooth automobile surface. After electrophoresis, three layers of outdoor paint will be sprayed. As we just mentioned, we use environmentally friendly paint without toxic chemicals. UV and UV protection are added to the outdoor paint, and three layers are sprayed, which is more colorful Naturally, the paint has stronger adhesion. For this reason, we specially made the chair outdoor test en581, which has accurate test on the strength and color fastness of the chair for outdoor use. You can see that it belongs to the commercial standard level, so the chair has a double guarantee. First, the electrophoresis does not rust and the outdoor paint does not fade, so you can use it in the outdoor at ease.

We hope that today’s detailed explanation can let you understand the iron wire chair, be familiar with the iron wire chair, and fall in love with the iron wire Chair, we hope to cooperate with you, especially to be your loyal partner after the epidemic, to cooperate with you to open the market and increase your profits.

Wonderful! Share this Case:

Custom Versatile Furniture For Any Room

Fill out the contact form with your ideas today and find the right furniture sets for your room applications.


Download Catalog